In this guide there are general instructions for configuring a device to use VoIPtalk.

1. Ensure the device is switched on and connected to a network.
   
   
2. On your device's configuration page enter:
   SIP Server, SIP Registrar or SIP Domain: voiptalk.org
   SIP User ID: VoIPTalk ID (eg 84411076)
   SIP Password: six-digit VoIPTalk Password (Not account password)
   Outbound Proxy: nat.voiptalk.org:5065
   IP Address: nat.voiptalk.org and Port number: 5065
   
   
3. Save these settings and confirm their values after a reboot.
   
   
4. Dial 902 to confirm your configuration. 
   
   

If you encounter any issues, ensure your Router + Firewall are not blocking VoIP traffic specifically on ports 5060 and 5065. Also ensure that the router is not blocking UDP traffic.

For additional assistance please refer to our instructions for other VoIP phones. You can also contact our support team via email. Please state your phone model, VoIPtalk ID and provide screenshots if possible in order to resolve any issues you may have as effectively as possible.