The following guide is for configuring a Yealink W73P / W73B with a VoIPOffice extension.

You will need:

• The VoIPOffice IP address – e.g. '77.240.xxx.xxx' 
• The Extension number – e.g. '1001'
• The extension password/secret (can be found by going to the edit mode of that specific extension, see the screenshot below)

Configuring Yealink W73P / W73B

1. Connect the base station power using supplied power adapter and the network cable. Please wait for it to boot up.
2. Insert the battery into the handset and press Power Key ''  on the handset to power it up.
3. Press Paging Key  '' on the base station. All the handset that registered to this base station will ring simultaneously and the screen will display the IP address of the base station.
4. Enter the IP address found in Step 3 into a web browser on a local PC.
5. Login using your set credentials or using default credentials:
   Username: admin
   Password: admin
   
   
   
6.  Select 'Account' from the sections on the left then 'Register'
   
   
   
7. Select the account you wish to configure. For this example it is 'Account 1' from the drop down list.
   
   
   
8. The following settings need to be set:

   Line Active: ON
   Label: <<VoIPOffice Extension>>
   Display Name: <<VoIPOffice Extension>>
   Register Name: <<VoIPOffice Extension>>
   Username: <<VoIPOffice Extension>>
   Password: <<VoIPOffice Extension Password ( Secret) >>
   Server Host: <<VoIPOffice IP>>
   

   
   
   
9. Click 'Confirm' to save settings
   
   
10. Under the configured account, 'Registered' should be shown. 
    
    
11. Congratulations! Your phone should now be configured