Gigaset N300IP Setup for VoIPOffice

Sorry, we didn't find any relevant articles for you.

Send us your queries using the form below and we will get back to you with a solution.

This article provides step-by-step guidance on setting up the Gigaset N300IP for VoIPOffice.

Using the web browser on your PC, navigate to www.gigaset-config.com or other known IP address.
Select the correct device.
In order to login, type in the system PIN. By default it is 0000
If the following page is shown, just click 'OK'
Once on the 'Home' Tab. Click on the 'Settings' tab in order to begin configuration.
In the left hand menu select 'Telephony'
Select the 'Edit' button in the account row you would like to configure. In this example 'IP1' will be used.
Select 'Show advanced settings'
The following settings need to be changed.
Connection name or number: VoIPOffice Extension

Authentication name: VoIPOffice Extension
Authentication password: VoIPOffice Extension Password
Username: VoIPOffice Extension
Display name: VoIPOffice Extension

Domain: VoIPOffice IP
Registration server: VoIPOffice IP
Outbound server address: VoIPOffice IP

Click 'Set' to confirm and save the settings.
Once configured ensure that the checkbox next to the account configured is selected. The status should change to 'Registered' after a few seconds.
Congratulations! Your phone should now be configured.